CRMX OEM RDM

CRMX OEM RDM is the OEM version of the CRMX Nova RDM products. It supports one full DMX universe of up to 512 channels at maximum refresh rate. It is available as a standard DMX/RDM receiver or as a DMX/RDM transmitter customized to your needs.

The CRMX OEM RDM is based on LumenRadio's advanced CRMX technology, hence you get all the advanced features such as automated cognitive coexistence, DMX fidelity, low latency, strong encryption, etc, all packed together on one small PCB.
CRMX OEM RDM allows for feedback in RDM enabled fixtures as well as feedback from the PCB itself, when used together with RDM compatible CRMX Nova and CRMX Outdoor equipment. To fit in to old wireless systems with legacy equipment the CRMX OEM RDM receiver is compatible with W-DMX™ transmitters. However when using it in this way you won't get the benefits of the advanced CRMX technology and you won't get support for RDM.

The CRMX OEM RDM is easy to integrate into your products, but if you run into problems anyway, LumenRadio's engineers will give the support you need.

CRMX Nova utilizes the international license free ISM band (2.4GHz).

Available as

• DMX/RDM receiver (OE-BRX1)
• DMX/RDM transmitter (OE-BTX1)

Supported protocols

• USITT DMX512, DMX512(1990) & DMX512-A
• RDM ANSI E1.20

Power

• Low voltage input: 6-12VDC (unregulated) or 5VDC (regulated)
• Current consumption: 250mA

Physical

• Dimensions (W x H): 65 x 27.5 mm

RF characteristics

• Operational frequency range: 2402-2480 MHz
• Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
• Tested link range: 500m in urban area using 100mW output power mode

Connectors

• Standard 2.54 x 2.54mm (0.1 x 0.1") 2x10 position interface connector
• MCX type antenna connector

Downloads

	LumenRadio CRMX OEM™ specifications (PDF)
	How to upgrade from W-DMX™ to CRMX™ for OEM (PDF)
	CRMX SuperNova v2.1.0 for Mac OS X (ZIP)
	CRMX SuperNova v2.1.0 for Windows (MSI)

W-DMX™ is a trademark of Wireless Solution Sweden